Home Improvement: How To Fix Your Garage Door?
If your garage door is malfunctioning, it can be incredibly frustrating. After all, your garage door is one of the vital parts of your home – it keeps your car safe and sound and protects your belongings from the elements. Fortunately, you can try a few things and fix your garage door yourself before calling in a professional.
This article will look at several common garage door problems homeowners face and how you can fix them. We’ll also give you some general tips on maintaining your garage door to keep it in good working order.
Apply lubricant to noisy garage doors
Over time, garage doors can become noisy due to a lack of lubrication. Applying a lubricant to the door’s tracks can help reduce the noise and make the door operate more smoothly.
If your garage door is making a lot of noise, it may be time to give it some attention. One way to silence a noisy garage door is to apply lubricant to the door’s tracks. This will help reduce friction and make the door operate more smoothly.
If you have never applied lubricant to your garage door before, don’t worry – it’s easy! Just follow these simple steps:
- Start by cleaning the tracks with a rag or brush. This will help remove any dirt or debris that could prevent the lubricant from doing its job.
- Next, apply a generous amount of lubricant to the tracks. You can use a commercial garage door lubricant or even some WD-40.
- Once the tracks are coated with lubricant, operate the door a few times to spread it around.
- Finally, wipe away any excess lubricant with a clean rag.
Applying lubricant to your garage door’s tracks is a quick and easy way to reduce noise and keep the door operating smoothly. Be sure to do this periodically – once every few months should suffice – to keep your door in top condition.
Have the springs adjusted or replaced
If your garage door isn’t opening or closing the way it should, one of the first things you should check is the tension on the springs. Over time, springs can loosen and lose their tension, which can cause them to break. Sagging and problems with opening or closing the garage door are common problems where homeowners seek professionals specializing in garage door repair in Towson MD and other neighborhoods. While some garage door problems can be fixed DIY style, adjusting or replacing springs is best left to the pros.
If you have a garage door with extension springs, one spring will be on each side of the door attached to the pulley system. Tension on these springs can be adjusted by changing the position of the safety cables. With torsion springs, one or two large springs will be above the door, and tension is adjusted by winding or unwinding them using a special wrench.
If your garage door isn’t working correctly, it’s important to determine the problem with the springs before trying other repairs. This is because attempting to fix other issues without first addressing the spring tension could worsen the problem or cause an injury. Thus, if your springs are loose or damaged, you’ll need to have them adjusted or replaced by a professional, as it’s very easy to get injured if you don’t know what you’re doing.
Check the batteries in your remote control
Any homeowner can tell you that a malfunctioning garage door is one of the most frustrating things. When your garage door isn’t working properly, it can throw off your day and make it difficult to get in and out of your home. A few things can cause your garage door to malfunction, but one of the most common culprits is dead batteries in your remote control. If you find that your garage door isn’t responding to your remote, the first thing you should do is check the batteries. Replacing the batteries in your remote control is a quick and easy way to fix your garage door, and it’s something that anyone can do.
Check the alignment of your garage door
If your garage door isn’t opening or closing properly, the first thing you should check is the alignment. Over time, wear and tear can cause the door to become misaligned, preventing it from working properly. To fix this, loosen the screws on the hinges and adjust the door until it is aligned correctly. Then, tighten the screws back into place.
Clean the garage door tracks
When keeping your garage door in good working order, one of the most important things you can do is clean the tracks regularly. Over time, these tracks can become cluttered with dirt, debris, and even small stones, eventually leading to the door becoming stuck or jammed. In addition, if the tracks are not properly lubricated, they can also begin to squeak and cause the door to open and close less smoothly. By taking some time to clean the tracks regularly, you can help keep your garage door functioning properly for many years to come.
If your garage door isn’t working properly, don’t despair – there are a few things you can do to try and fix it yourself. If all else fails, you can always call in a professional. In the meantime, following these tips should help keep your garage door in good working order.